M978 Tanker Maintenance Instructions (Cont)
Push two coupling
gaskets (7 and 11) onto end
of VT VENTURI
Remove VT VENTURI
assembly (3) from two
pipes (12 and 13).
Remove coupling gaskets (7
and 11) and reducer (14)
from VT VENTURI
(1) Loosen two nuts (1) and remove tube (2)
from elbow (3) and needle valve (4).
(2) Remove needle valve (4) from VT
VENTURI assembly (5).
(3) Remove plug (6) and two elbows (3 and 7)
from VT VENTURI assembly (5).
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To
avoid injury or death, keep away from open
fire and use in well-ventilated area. If
adhesive, solvent, or sealing compound gets
on skin or clothing, wash immediately with soap
Clean all metal parts in dry cleaning solvent.
Inspect all metal parts for damage.
Replace damaged parts.
25 - 157