Body Accessory Maintenance Instructions (Cont)
WINDSHIELD WASHER ASSEMBLY REPAIR (MODEL B).
This task covers:
d. Follow-on Maintenance
TM or Para
Windshield washer assembly
(removed and empty) on clean
Special Environmental Conditions
General Safety Instructions
MOS 63S, Heavy wheel vehicle mechanic
Remove washer cover (1) from washer jar (2).
Remove pump (3), two hoses (4 and 5), and two
Remove two grommets (7) and umbrella
valve (8) from cover (9).
Using water, rinse sediment from bottom of
washer jar and from pump screen.
Inspect to make sure hoses are not cracked or
plugged and that hoses fit firmly on cover and
Inspect cover and washer jar for cracks and
Inspect for damaged or missing sections of
Install umbrella valve (8), two grommets (7),
and hoses (4) and (5) into cover (9).
Install pump (3) and two connectors (6) on
hoses (4) and (5).
Install washer cover (1) on washer jar (2).
d. Follow-on Maintenance.
Install and fill windshield washer assembly
with fluid (para 18-4).
Check operation of windshield washer
END OF TASK