TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
(4) Remove
(5) Remove
(6) Remove
(7) Remove
NOTE
Tag and mark all wires.
four screws (11) and wires (12, 13, 14, and 15).
two diodes (16) from wires (14 and 15).
wire (17) from two diodes (16).
four connectors (18) from wires (12, 13, 14, and 15).
(8)
(9)
(10)
(11)
(12)
(13)
(14)
17-114
Remove screw (19) and pull switch (20) from control box (8).
Remove four screws (21) and wires (12, 13, 22, and 23).
Remove four connectors (18) from wires (12, 13, 22, and 23).
Remove wire harness (4) from control box (8).
Remove seal (3), ring (2), and cap (1) from wire harness (4).
Loosen two screws (24) and
lockwashers (25).
Loosen shell (26) and slide shell and
sleeve (27) down wire harness (4).