Cab and Body Maintenance Instructions (Cont)
TANK MOUNTING BOLT REPLACEMENT.
Both left and right rear tank mounts are
removed the same way.
Remove four locknuts (13),
washers (14), screws (15), washers (16),
and spacers (17) from rear tank
mounting bracket (18) and frame
mounting bracket (19).
Do not get under tank while it is supported by lifting device. Tank could fall, causing
personal injury or death.
Tank must be lifted slowly and carefully. Make sure no wires, hoses, or linkages are caught
during lifting, or severe damage to tank and chassis will result.
Tank is lifted only as required to remove screws for replacement.
Rubber pads may fall out of front mounting brackets when tank is lifted.
Attach suitable lifting device and lifting straps to tank (20).
Using a lifting device as required, raise tank (20) from truck (6).
Remove four rubber pads (21 and 22) as required, from front and rear frame mounting brackets
(12 and 19).