Transfer Case and Propeller Shaft Maintenance Instructions (Cont)
W E A T H E R R E M O V A L / I N S T A L L A T I O N ( C O N T ) .
There are two type of transfer cases.
Model A has the breather located in
the rear, while Model B has the
breather located in the front.
Removal. Loosen nut (1). Remove
transfer case breather (2).
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
b. Installation. Coat threads with pipe
thread sealing compound and install
transfer case breather (2) by tightening
Follow-on Maintenance. None.
END OF TASK