TM 9-2320-279-20-2
Steering System Maintenance Instructions (Cont)
NOTE
Washer is only used on screw through
center hole of fender brace.
(4)
Remove three nuts (11), three
lockwashers (12), one washer (13), a
three screws (15) from fender brace
(5)
Remove three nuts (17),
lockwashers (18), washers (19), and
screws (20) from left side of
reservoir (6).
(6)
Soldier A and Soldier B remove
reservoir (6) from fender (21).
NOTE
Note position of elbow for installation,
(7)
Remove fitting (8) and preformed packing (22).
(8)
Remove elbow (10) and preformed packing (23).
(9)
Remove plug (24) and preformed packing (25).
b. Installation.
(1)
Install three preformed packings (1,2,
and 3) on fitting (4), elbow (5), and
plug (6).
(2)
Install fitting (4), elbow (5), and plug (6)
in reservoir (7).
Change 2
13-59