WARNING
TM 9-2320-279-20-2
Steering System Maintenance Instructions (Cont)
13-8. HYDRAULIC FILTER REMOVAL/INSTALLATION (CONT).
b. Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1)
(2)
(3)
(4)
(5)
(6)
Coat threads of elbows (1 and 2) with
pipe thread sealing compound and install
in hydraulic filter housing (3).
Install hydraulic filter housing (3) on
mounting bracket (4) with two
screws (5), lockwashers (6), and
washers (7).
Connect tube (8) to relief
valve (9) and elbow (1).
Connect hose (10) to relief
valve (9).
Connect hose (11) to elbow (l).
Connect tube (12) to elbow (2).
13-33