Steering System Maintenance Instructions
Loosen nuts (1) on tie rod end clamps (2).
Tie rod ends must be threaded into tie rod so threads are beyond opening under clamp.
Failure to do so, may result in damage to equipment.
Be sure tie rod ends are installed evenly in steering arm.
Turn tie rod ends (3) in or out until ends fit in holes in steering arm (4).
Install tie rod (5 or 6) into steering arm (4) holes.
Tie rod end clamps on number two axle must have nuts and screws on bottom of tie rod to
prevent end clamps from striking shock absorber mount.
Install castle nut (7).
Install cotter pin (8).