HUB AND DRUM ASSEMBLY, WHEEL BEARING, AND STUD REMOVAL/lNSTALLATlON
NO. 1 AND NO. 2 AXLES CONT).
a . R e m o v a l .
W A R N I N G
Use jackstands to support weight of axle. Failure to do so could result in personal
Keep hub and drum assembly (1) from turning. Remove 10 screws (2) and lockwashers (3).
Remove two screws (4).
Use puller screws (5) to remove hub cap (6). Remove two puller screws.
Turn hub and drum assembly (1) to
recess (6) and remove screw (7),
lockwasher (8), and lock (9).
Using wheel bearing wrench, remove