TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-34. TRANSFER CASE LOCKUP VALVE REMOVAL/INSTALLATION (CONT).
a.
Removal.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
NOTE
Soldier A is inside cab. Soldier B is under cab.
Tag and mark wires and air lines before removal.
Remove two wires (1), screws (2), and lockwashers (3).
Loosen three air lines (4, 5, and 6).
Soldier A holds screw (7) while Soldier B removes nut (8) and lockwasher (9).
Remove three air lines (4, 5, and 6) and lockup valve (10).
Remove air line (6).
Remove air line (11) and
elbow (12).
Soldier A holds bulkhead
fitting (13) while Soldier B
removes nut (14) and
lockwasher (15).
Remove bulkhead fitting (13).
Remove elbow (16) from
fitting (13).
11-142
Change 2