TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
NOTE
Tag and mark air lines, valves, and fittings before removal.
(1)
Remove air line (1).
(2)
Remove air line (2).
(3)
Remove two nuts (3), lockwashers (4), and screws (5).
NOTE
Some vehicles have nuts, lockwashers, and screws. Others have flanged nuts and screws
(4)
Remove two nuts (6), lockwashers (7), and screws (8).
(5)
Remove two inner clamps (9) and reservoir (10) from vehicle.
(6)
Remove air line (11).
(7)
Remove drain valve (12) and
two elbows (13 and 14) from
reservoir (10).
(8)
Remove elbow (15), pressure
valve (16), nipple (17), and
reducer bushing (18).
(9)
Remove air line (1).
(10) Remove elbow (19).
(11)
Remove quick disconnect (20), nut (21), lockwasher (22), anchor fitting (23), elbow (24), and
nipple (25).
Change 2
11-129