Brake and Air System Maintenance instructions (Cont)
Some vehicles have two nuts,
lockwashers, and screws. Others have
two flanged nuts, one flanged screw,
one screw, and one flat washer. Flat
washer is between screw and clamp.
Install clamp (11) and No. 1 air
manifold (6) on
crossmember (12) with two
screws (13), lockwashers (14),
and two nuts (15).
Connect air lines (16, 17, 18,
Install plastic cable ties as necessary.
Start engine to build up air
pressure (TM 9-2320-279-10).
Check for air leaks
Shut off engine
END OF TASK
MODEL A SHOW