Preparation for Transport and Operation (Cont)
REMOVE/INSTALL VENT ROLLOVER RAILS.
Remove Vent Rollover Rails.
Wet metal surfaces are slippery. Use extreme care when
climbing on tank or injury could result from a fall.
Remove two screws (3) and washers (2) from vent rollover rail (4).
Pull vent rollover rail (4) toward manhold cover (5) until it is clear of
Secure washers (2) and screws (3) to vent rollover rail (4).
Remove vent rollover rail (4) from vehicle.
Remove other vent rollover rail (7) by repeating steps (1) through (4).
Stow vent rollover rails (4 and 7) for transport as instructed by