Auxiliary Equipment Operation (Cont)
2-31. AUXILIARY EQUIPMENT OPERATING PROCEDURES (CONT).
Remove two protective
masks (1) and canisters
(2) from pouches (3).
Put on protective masks
Clear and seal protective
Slip clip must be repositioned
on filter assembly air intake so
intake holes are open for gas
particulate filter system to work.
Clip is repositioned through
bottom of bracket.
Pull down on spring clip
(4) to uncover intake holes
For FHTV model vehicles, ensure
that 24V battery disconnect switch is
ON before operating gas particulate
filter (para 2-9a.1).
Set GAS PARTICULATE
FILTER switch (6) to ON.