5-10. REAR ROLLER MOUNTING BRACKET REPLACEMENT (MODEL
This task covers:
Tools and Special Tools:
Lifting Device, Minimum Capacity 375 lb
Tool Kit, General Mechanic's: Automotive
Rear cable guide removed (if equipped with self-
recovery winch) (TM 9-2320-279-20)
If vehicle is equipped with a self-recovery winch, only seven fasteners will be
removed. The other four are removed with cable guide.
Rear roller mounting bracket weighs 92 lb (41.76 kg). Attach suitable lifting device
prior to removal to prevent possible injury to personnel.
Remove 11 locknuts (1), seven screws (2), four screws (3), and rear roller mounting bracket (4) from left side
and right side of vehicle (5). Discard locknuts.
Install rear roller mounting bracket (4) on left side with four screws (3) and new locknuts (1). Install right side
of mounting bracket (4) with seven screws (2) and new locknuts (1).