4-70.1 DIGITAL CONTROLLER WIRING HARNESS REPLACEMENT (MODEL B ONLY)
Both transducer harness plugs are connected the same way.
(7.1) If removed, install gasket (6), transducer harness plug (26), and screw (27) to hydraulic pressure
Both LHS harness plugs are connected the same way.
Connect LHS harness plug (25) to transducer harness plug (26).
Both hydraulic temperature sensor terminals are installed the same way.
Install hydraulic temperature sensor terminal (23) onto hydraulic temperature sensor (24) and secure with
(10) Install hand held worklight harness (20) onto hand-held worklight (21).
(11) Install resistor (19) onto resistor connector (18).