4-70.1 DIGITAL CONTROLLER WIRING HARNESS REPLACEMENT (MODEL B ONLY)
Left and right side transit valve plugs are removed the same way. Left side shown.
(15) Remove screw (29), transit valve plug (30), and gasket (6) from left side transit valve (31). Discard gasket.
(16) Repeat step (15) for right side transit valve.
Left and right side remote control connectors are removed the same way. Left side shown.
(17) Remove four screws (32), protective cap (33), and left side remote control connector (34) from bracket (35).
(18) Repeat step (17) for right side remote control connector.
(19) Remove four screws (36) and LHS bulkhead connector (37) from bulkhead plate (38).
(20) Remove worklight connector (39) from stationary worklight harness (40).