4-70.1 DIGITAL CONTROLLER WIRING HARNESS REPLACEMENT (MODEL B ONLY)
Both hydraulic temperature sensor terminals are removed the same way.
(12) Remove screw (22) and hydraulic temperature sensor terminal (23) from hydraulic temperature sensor (24).
Both LHS harness plugs are disconnected the same way.
(13) Disconnect LHS harness plug (25) from transducer harness plug (26).
Both transducer harness plugs are disconnected the same way.
(14) If necessary, remove screw (27), transducer harness plug (26), and gasket (6) from hydraulic pressure