Table 3-1. Operator/Crew Troubleshooting (continued)
Test or Inspection
1. BAP CENTER ROLLER AND/OR TRANSLOAD ROLLERS WILL NOT OPERATE
Operate hand pump handle and watch to see if center roller assembly (2) rises.
With lever (1) in the up position, center roller assembly (2) should rise.
With lever (1) in the down position, transload roller extension cylinders (3) should
If desired action(s) is not observed or if leaks are noted, notify Unit maintenance.
Check for leaks in hydraulic lines, fittings, and components.
If leaks are noted, notify Unit maintenance.
Check hydraulic fluid level in hand pump.
If fluid is low, notify Unit maintenance.
If problem is not resolved, notify Unit maintenance.