TM 5-5420-234-14&P
2-31. MANUALLY REMOVING LOAD DURING HYDRAULIC POWER LOSS (continued).
c
MALE CONNECTOR
FEMALE CONNECTOR
e.
Connect female end of disabled vehicle's slave hose (3) to hose-mounted male end of return hose (4) on
operable vehicle.
f.
Start engines of both vehicles.
g. Turn light control switch of both vehicles to STOP LIGHT position.
h. Engage PTO ENGAGE switch on operable vehicle to ON.
CAUTION
Make sure slave hoses are not stretched or run over during operations.
i.
Continue the load/unload operations using operable vehicles' controls.
j.
After completion of load cycle, disconnect and store hydraulic hoses.
2-145