2-27. MANUALLY LOADING THE BAP FROM THE GROUND (continued).
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
g. Turn LHS MODE SELECT switch (5) to HOOK ARM ONLY (position 2).
h. Position HIGH IDLE switch (6) to ON.
To raise and move hook arm toward the BAP, move joystick (7) to UNLOAD and hold.
Release joystick (7) when hook arm completes full movement rearward.
k. Turn HIGH IDLE switch (6) to OFF.