2-22. DECALS AND INSTRUCTION PLATES (continued).
"CBT Shipping Data." This data plate, located on the front of the toolbox, provides information on BAP
weight and dimensions.
"Coupling Connection CAUTION." This data plate, located on the road side of the winch frame, cautions you
k. "Hand Pump Valve." This data plate, located next to the hand pump, illustrates proper positioning of the hand
"LHS MODE SELECT Switch Position." This decal, located inside the cab on the control box cover,
identifies the functions of the numbered positions of the LHS MODE SELECT switch.
m . "Pull Master Winch Corporation." This manufacturer's data plate, located on the winch assembly, provides
descriptive data pertaining to the winch.
n. "Winch Frame Locks." There are two winch frame locks data plates, located on the front side of the BAP
winch frame, providing information on the locking positions.
o. "BAP Hold-down Locks." Located on Transporter frame, provides information on lock operation.
a. For operation of the bridge bays, refer to TM 5-5420-209-12.
b. For operation of the bridge erection boat, refer to TM 5-2090-202-12&P and TM 5-1940-277-10.
a. The M1977 CBT is the prime mover for the CBT System. The chassis is 112 inches (284 cm) high and 101
inches (256.5 cm) wide and is reducible to 101 inches (256.5 cm) high and 96 inches (243.8 cm) wide.
Reduction in width is accomplished by removing the mirrors and storing them in the cab. Reduction in height is
accomplished by removing and palletizing the following items: the spare tire, the CBT workstation assembly and
operator's handrail, and the exhaust extension.
b. When the LHS is mounted on the chassis, the height of the Transporter is raised above 112 inches (284 cm).
However, by removing the hook arm lockpin and lowering the hook arm onto the hook arm assembly, the height
of the Transporter is reducible to 101 inches (256.5 cm) high and 96 inches (243.8 cm) wide.
The CBT with the BAP mounted is 157.4 inches (400.8 cm) high; width is 121.0 inches (307.3 cm) without
guide pads and 131.2 inches (333.2 cm) with guide pads. With either bridge bay loaded, the height increases to
161.1 inches (409 cm). When the bridge erection boat with cradle is loaded, the width remains the same but the
height increases to 163.8 inches (416 cm).