2-16. HIGH-BANK BRIDGE BAY LAUNCH (continued).
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
Turn LHS MODE SELECT switch (9) OFF, and turn PTO ENGAGE switch (10) to ON.
While moving LHS hook arm rearward, make sure winch hydraulic hose
lines are not trapped or damaged.
Install remote control unit (11):
Remove remote control unit (11) and cable (13) from stowage box (12).
Connect cable (13) to curb-side or road-side LHS receptacle (14).
Turn HIGH IDLE switch (15) to ON.