2-15. FREE BRIDGE BAY LAUNCH (continued).
After safety pin is disengaged, make sure all personnel are clear of back of
u. Just before Transporter enters the water, pull safety pin (31) from air release valve lever (12).
Place CBT transfer case in low setting prior to backing Transporter into the water.
Back Transporter into the water. Do not exceed fording depth of Transporter (4 ft, or 1.2 m).
After entry of Transporter into the water the parking brake may slip, allowing
Transporter to roll into deeper water and resulting in damage to equipment.
w. Apply parking brake and place transmission in neutral.
x. When directed, pull lanyard (11) to release front pin lock assemblies (5), allowing bridge bay to roll off