2-12. UNLOADING BRIDGE BAY TO THE GROUND (continued).
o. Immediately release parking brake when rear of bridge bay touches the ground.
p. Continue unloading while steering Transporter as it rolls forward. Release MAIN FRAME switch (25) when
front of bridge bay is approximately 2 feet (0.6 m) above the ground.
q. Position HIGH IDLE switch (24) to OFF.
Position WINCH switch (14) to OUT until bridge bay is resting on the ground.
Apply parking brake.
Position MAIN FRAME switch (25) to UNLOAD to release tension on winch cable. Release when cable is
slack enough so winch hook may be unhooked from bay lifting eye (13).
Always wear leather gloves when
handling winch cable. Handling
winch cable with bare hands
could result in injury to
u. Remove winch cable hook (12) from stationary bay lifting