2-12. UNLOADING BRIDGE BAY TO THE GROUND (continued).
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
g. Turn LHS MODE SELECT switch (10) to OFF, and position PTO ENGAGE switch (11) to ON.
h. Make sure winch cable hook (12) is securely attached
to stationary bay lifting eye (13) (refer to TM 5-5420-
209-12). Make sure winch cable hook (12) is facing
rear with throat up.