2-11. LOADING BRIDGE BAY FROM THE GROUND (continued).
Secure curb-side and road-side rear guides (10) in the engaged position:
Rotate latch pin (9), and swing rear guide (10) to the intermediate position.
Make sure each latch pin (9) engages hole (11) in rear guide (10).
When selecting PTO ENGAGE switch, engine must be at low idle speed. Se-
lection of PTO ENGAGE switch with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in damage to
PTO ENGAGE switch must be turned off before road transport or severe
equipment damage could result.
k. Turn LHS MODE SELECT switch (12) to OFF, and turn PTO ENGAGE switch (13) to ON.