MWO 9-2320-279-34-1
10. MODIFICATION PROCEDURES.
a. Preparation for Installation of Three-Point
Seat Belt.
(4) If a gas particulate kit is installed, remove
valve (6), connector (7), and retaining ring
(8). If a gas particulate kit is not installd,
90 to step 6.
NOTE
Use existing fasteners unless
otherwise shown in procedure.
(1) Remove two lap belts (1) in accordance
with TM 9-2320-279-20, para 16-32.
Save fasteners.
NOTE
Tag and mark hoses before
removal.
(2) If windshield washer reservoir (2) is in-
stalled behind the passenger seat,
remove air hose (3) and fluid hose (4)
(5) Remove clip (9) and hose (10). Move
from the reservoir.
hose (10) out of the way.
(3)
Remove reservoir (2) from bracket (5).
(6) Remove screw (11) and, if installed,
hanger (12).
4