Figure 6. Slave Steering Gear Oil Sampling Valve installation.
Apply antizeizing tape and install 45-degree elbow (3), reducer bushing (4), and high-pressure sampling valve (5)
on slave steering gear assembly (2).
Follow-on Maintenance. Test performance of newly installed valves in accordance with LO 9-2320-279-12.
WEIGHT AND BALANCE DATA. Weight and balance are not significantly affected.
QUALITY ASSURANCE REQUIREMENTS. Not applicable.
RECORDING AND REPORTING OF THE MODIFICATION.
Records and Reports: Record the modification in accordance with AR 750-10, DA PAM 738-750, DA PAM 738-
751, and TB 9-1100-803-15.
Marking Equipment: Not applicable.
Identification Data: Not applicable.
MATERIAL CHANGE (MC) NUMBER. This MWO is authorized by MC number 1-87-06-4137.
MODIFICATION IDENTIFICATION. The installation of the engine oil sampling valve, transmission oil sampling
valve, and the slave steering gear sampling valve is illustrated in Figures 2, 4, and 6, respectively.