b. NATO Receptacle Removal.
(5) Remove top plate (10) and cover (11).
c Installation of NATO Slave Box on Left Front
Remove screw (1), Iockwasher (2), and
positive battery cable (3) from NATO re-
(2) Remove screw (5), Iockwasher (6), and
negative battery cable (7) from NATO
(3) Discard positive battery cable (3) and
negative battery cable (7).
In some models it may be easier to
drill holes from the underside of the
Use the slave box as a hole location tem-
plate. Place It on the left front fender as
Remove four locknuts (8), screws (9), and
shown. Mark the four mounting holes,
NATO receptacle (4), Discard locknuts
Remove the slave box and drill four holes
for 5/16 inch mounting screws.